Door & Lock Type 1
ACC warning does not operate
In this manual: Door & Lock Type 1
~1min read
Diagnosis Procedure 1.CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
Refer to WCS-40, "Component Function Check".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.REPLACE BCM 1. Replace BCM. Refer to BCS-93, "Removal and Installation".2. Confirm the operation after replacement.
Is the result normal? YES >> INSPECTION END
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Was this page helpful?