Intelligent key low battery warning does not operate
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal? YES >> GO TO 2.
NO-1 >> Refer to BCS-67, "DTC Index". (BCM) NO-2 >> Refer to MWI-36, "DTC Index". (Combination meter)
2.CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM”. 2. Select “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT” mode.3. Check “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT”.
Refer to DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super Lock)".
Is the inspection result normal? YES >> GO TO 3.
NO >> Set “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT”.
3.CHECK KEY WARNING LAMPCheck key warning lamp.
Refer to DLK-94, "Component Function Check".
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace the malfunctioning parts.
4.CHECK INTELLIGENT KEYCheck Intelligent key.
Refer to DLK-91, "Component Function Check".
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair or replace the malfunctioning parts.
5.CHECK INSIDE KEY ANTENNACheck inside key antenna.
• Instrument center: Refer to DLK-55, "DTC Logic". • Console: Refer to DLK-57, "DTC Logic".• Luggage room: Refer to DLK-59, "DTC Logic".
Is the inspection result normal? YES >> GO TO 6.
NO >> Repair or replace the malfunctioning parts.
6.REPLACE BCM 1. Replace BCM. Refer to BCS-93, "Removal and Installation".2. Confirm the operation after replacement.
Is the result normal? YES >> INSPECTION END
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".