Door & Lock Type 1
Door does not lock/unlock with door key cylinder operation
In this manual: Door & Lock Type 1
~1min read
Diagnosis Procedure
1.CHECK POWER DOOR LOCK OPERATIONCheck power door lock operation.
Does door lock/unlock with door lock and unlock switch? YES >> GO TO 2.
NO >> Go to DLK-110, "ALL DOOR : Diagnosis Procedure".
2.CHECK UNLOCK SENSORCheck unlock sensor.
Refer to DLK-104, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace the malfunctioning parts.
3.REPLACE BCM 1. Replace BCM. Refer to BCS-93, "Removal and Installation".2. Confirm the operation after replacement.
Is the result normal? YES >> INSPECTION END
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Was this page helpful?