Transaxle & transmission 6MT: RS6F94R
Air breather hose
In this manual: Transaxle & transmission 6MT: RS6F94R
~1min read
MR16DDT : Exploded View

1. Clip
2. Air breather hose
3. 2 way connector
MR16DDT : Removal and Installation
REMOVAL
1. Remove air cleaner case. Refer to EM-26, "Removal and Installation".2. Remove clips (1).
: Vehicle front
3. Remove air breather hose from the 2 way connector.
CAUTION:When removing air breather hose, be sure to hold 2 way connector securely.

INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:• Install air breather hose, preventing crush and clogging caused by bending.
• Insert the allowance of air breather hose to the spool of the 2 way connector.
• Install air breather hose to the 2 way connector with the paint mark faced forward of the vehicle.• Securely engage the clips in the mounting hole.
K9K : Exploded View

1. Clip
2. Air breather hose
3. 2 way connector
K9K : Removal and Installation
REMOVAL
1. Remove clips (1).
: Vehicle front
2. Remove air breather hose from the 2 way connector.
CAUTION:When removing air breather hose, be sure to hold 2 way connector securely.

INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:• Install air breather hose, preventing crush and clogging caused by bending. • Insert the allowance of air breather hose to the spool of the 2 way connector. • Install air breather hose to the 2 way connector with the paint mark faced forward of the vehicle.
• Securely engage the clips in the mounting hole.
Was this page helpful?