Air cleaner and air duct
Exploded View

1. Hose clamp
2. PCV hose
3. Hose clamp
4. Air cleaner filter
5. Air cleaner filter case 6. Grommet
7. Inlet air duct (lower) 8. Grommet
9. Inlet air duct (upper) 10. Bracket
11. Air cleaner case
12. O-ring
13. Mass air flow sensor 14. Air duct
A. To electric throttle control actuator B. To rocker cover
disassembly.
: N·m (kg-m, in-lb)
Removal and Installation
REMOVAL
NOTE:
Mass air flow sensor is removable under the car-mounted condition.
11. Remove mass air flow sensor from air cleaner case, if necessary.
• Never shock the mass air flow sensor. • Never disassemble the mass air flow sensor. • Never touch the sensor of the mass air flow sensor.INSTALLATION
Note the following, and install in the reverse order of removal.
• To install air duct, align the matching marks on both ends with the others.
1. : Electric throttle control actuator 2. : Air cleaner case
A. : Matching mark

• Align marks. Attach each joint. Screw clamps firmly.
Clamp tightening torque : 4,5 N·m
• Install PVC hose with each matching mark positioned as follows:
A : White mark
B : Matching mark
Air duct side : Align the matching mark with that of air duct side.
Rocker cover side : Face the white mark in forward direction of the vehicle.

Inspection
INSPECTION AFTER REMOVAL
Inspect air duct for crack or tear.
• If anything found, replace air duct.