Transaxle & transmission CVT: RE0F10B

Component parts

In this manual: Transaxle & transmission CVT: RE0F10B
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~7min read

CVT control system : Component Parts Location

1. Multi display unit (MDU)*

1. Multi display unit (MDU)* Refer to DMS-3, "Component Parts Location". 2. Combination meter 3. Manual mode indicator (On the combination meter) 4. Shift position indicator (On the combination meter) 5. Malfunction indicator lamp (MIL) (On the combination meter) 6. ABS actuator and electric unit (control unit) Refer to BRC-97, "Component Parts Location". 7. ECM Refer to EC-25, "ENGINE CONTROL SYSTEM : Component Parts Location". 8. IPDM E/R Refer to PCS-5, "Component Parts Location" (With Intelligent Key system), PCS-37, "Component Parts Location" (Without Intelligent Key system).

9. BCM Refer to BCS-6, "BODY CONTROL SYSTEM : Component Parts Location" (With Intelligent Key system), BCS-96, "BODY CONTROL SYSTEM : Component Parts Location" (Without Intelligent Key system)
10. Stop lamp switch
11. Transmission range switch 12. Primary speed sensor 13. CVT unit connector
14. Control valve assembly 15. Output speed sensor
16. Secondary speed sensor 17. TCM
18. S mode switch
19. G sensor

A. Brake pedal, upper B. Transaxle assembly
C. Engine room
D. CVT shift selector assembly E. Driver seat (LHD) or passenger seat (RHD), under Transaxle assembly

*: With Nissan Dynamic Control System

NOTE

:
The following components are included in control valve assembly (13).

• CVT fluid temperature sensor • Secondary pressure sensor • ROM assembly
• Line pressure solenoid valve • Low brake solenoid valve • High clutch & reverse brake solenoid valve • Torque converter clutch solenoid valve

CVT control system : Component Description


*: With Nissan Dynamic Control System

*: With Nissan Dynamic Control System

CVT control system : TCM

• The vehicle driving status is judged based on the signals from the sensors, switches, and other control units, and the optimal transaxle control is performed.

• For TCM control items, refer to TM-144, "CVT CONTROL SYSTEM : System Description".

CVT control system : Transmission Range Switch

• The transmission range switch is installed to upper part of transaxle case.

• The transmission range switch detects the selector lever position.

CVT control system : Input Speed Sensor

• The input speed sensor is installed to transaxle assembly. • The input speed sensor detects input shaft speed. TCM evaluates input speed the from the input shaft revolution.

• The input speed sensor generates the ON-OFF pulse (short waveform) in proportion to the rotating body speed which is “The higher the rotating body speed is, the faster the change cycle is”. The TCM judges the rotating speed from the changing cycle of this pulse signal.

CVT control systemM : Primary Speed Sensor

CVT control systemM : Primary Speed Sensor

• The primary speed sensor is installed to side cover of transaxle. • The primary speed sensor detects primary pulley speed.

• The primary speed sensor generates the ON-OFF pulse (short waveform) in proportion to the rotating body speed which is “The higher the rotating body speed is, the faster the change cycle is”. The TCM judges the rotating speed from the changing cycle of this pulse signal.

CVT control system : Secondary Speed Sensor

CVT control system : Secondary Speed Sensor

• The secondary speed sensor is installed to side cover of transaxle. • The secondary speed sensor detects secondary pulley speed.

• The secondary speed sensor generates the ON-OFF pulse (short waveform) in proportion to the rotating body speed which is “The higher the rotating body speed is, the faster the change cycle is”. The TCM judges the rotating speed from the changing cycle of this pulse signal.

CVT control system : CVT Fluid Temperature Sensor

CVT control system : CVT Fluid Temperature Sensor

• The CVT fluid temperature sensor is installed to control valve. • The CVT fluid temperature sensor detects CVT fluid temperature in oil pan.

• The fluid temperature sensor uses a thermistor, and changes the signal voltage by converting changes in the CVT fluid temperature to a resistance value. TCM evaluates the CVT fluid temperature from the signal voltage value.

CVT control system : Secondary Pressure Senso

CVT control system : Secondary Pressure Senso

• The secondary pressure sensor is installed to control valve. • The secondary pressure sensor detects the pressure applied to the secondary pulley.

• When pressure is applied to the ceramic device in the secondary pressure sensor, the ceramic device is deformed, resulting in voltage change. TCM evaluates the secondary pressure from its voltage change. Voltage is increased along with pressure increase.

CVT control system : Line Pressure Solenoid Valve

CVT control system : Line Pressure Solenoid Valve

• The line pressure solenoid valve is installed to control valve. • The line pressure solenoid valve controls the pressure regulator valve. For information about the pressure regulator valve, refer to TM-141, "TRANSAXLE : Component Description".

• The line pressure solenoid valve uses the linear solenoid valve [N/H (normal high) type].

NOTE:
• The principle of the linear solenoid valve utilizes the fact that the force pressing on the valve spool installed inside the coil increases nearly in proportion to the current. This allows it to produce a fluid pressure that is proportional to this pressing force.

• The N/H (normal high) produces hydraulic control when the coil is not energized.

CVT control system : Lock-up Select Solenoid Valve

• The lock-up select solenoid valve is installed to control valve. • The lock-up select solenoid valve controls the select switch valve that switches the oil pressure applied to the lock-up clutch, forward clutch or reverse clutch.

• The lock-up select solenoid valve utilizes an ON-OFF solenoid valve.

NOTE:
• The only operations of the valve spool installed inside the coil are pressing or not pressing the ball which seals the hydraulic supply section into the seat. This A/T uses N/L (normal low) type. • When voltage is not applied to the coil, the force of the pilot pressure presses the ball against the seat, stopping the pilot pressure at that point.

• When voltage is applied to the coil, the valve is pulled in the direction of the coil, disengaging the hydraulic seal which the ball creates. This supplies pilot pressure to the operating locations.

CVT control system : Step Motor

The step motor changes the step with turning 4 coils ON/OFF according to the signal from TCM. As a result, the flow of line pressure to primary pulley is changed and pulley ratio is controlled.

CVT control system : G Sensor

• G sensor is installed to floor under instrument lower cover. • G sensor detects front/rear G and inclination applied to the vehicle.

• G sensor converts front/rear G and inclination applied to the vehicle to voltage signal. TCM evaluates front/ rear G and inclination angle of the vehicle from the voltage signal.

CVT control system : Manual Mode Switch

Manual mode switch is installed in shift CVT shift selector. The manual mode switch sends shift up and shift down switch signals to TCM.

TCM sends the switch signals to combination meter via CAN communication line. Then manual mode switch position is indicated on the shift position indicator.

CVT control system : Shift Position Indicator

TCM transmits shift position signal to combination meter via CAN communication. The actual shift position is displayed on combination meter according to the signal.

Shift lock system : Component Parts Location

1. Shift lock release button

1. Shift lock release button 2. Park position switch 3. Shift lock solenoid
4. Stop lamp switch

A: CVT shift selector assembly B: Brake pedal, upper

Shift lock system : Component Description

Structure and operation