SRS Airbag Control System
Diagnosis Procedure
In this manual: SRS Airbag Control System
~1min read
1.CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal? YES >> GO TO 2.
NO >> Replace harness connector.
2.CHECK WIRING HARNESSCheck the wiring harness externals.
Is the inspection result normal? YES >> GO TO 3.
NO >> Replace wiring harness.
3.REPLACE LAP PRE-TENSIONER LH 1. Replace lap pre-tensioner LH. Refer to SR-33, "Removal and Installation".2. Perform DTC confirmation procedure. Refer to SRC-130, "DTC Logic".
Is DTC detected? YES >> GO TO 4.
NO >> INSPECTION END
4.REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace air bag diagnosis sensor unit. Refer to SR-30, "Removal and Installation".2. Perform DTC confirmation procedure. Refer to SRC-130, "DTC Logic".
Is DTC detected? YES >> GO TO 1.
NO >> INSPECTION END
Was this page helpful?