Exterior Lighting System Halogen type
Front fog lamp
In this manual: Exterior Lighting System Halogen type
~1min read
Exploded View

1. Front fog lamp assembly 2. Metal clip
3. Front fog lamp bulb
4. Front fog lamp bracket 5. U nut
6. Front bumper fascia lower
: Pawl
: N·m (kg-m, in-lb)
Removal and Installation
CAUTION:Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1. Remove front fender protector. Keep the service area. Refer to EXT-22, "Removal and Installation". 2. Disconnect front fog lamp harness connector. 3. Remove front fog lamp bracket.4. Remove front fog lamp mounting bolt, and then remove front fog lamp from front fog lamp bracket.
INSTALLATION
Note the following item, and then installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to EXL-88, "Description"
Replacement
CAUTION:• Disconnect the battery negative terminal or remove the fuse. • Never touch the glass of bulb directly by hand. Keep grease and other oily matters awy from it. • Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.
FRONT FOG LAMP BULB
1. Remove fender protector. Keep the service area. Refer to EXT-22, "Removal and Installation". 2. Remove front fog lamp bulb connector (1).3. Rotate the bulb (2) counterclockwise and unlock it.

Was this page helpful?