Exterior Lighting System Halogen type
Light & rain sensor
In this manual: Exterior Lighting System Halogen type
~1min read
Exploded View
CAUTION:When the light & rain sensor is removed from windshield, the light & rain sensor cannot be re-used.
REMOVAL

1. Light & rain sensor bracket 2. Mirror base
3. Light & rain sensor 4. Inside mirror assembly
: Pawl
: Do not reuse
Removal and Installation
REMOVAL
1. Remove inside mirror assembly. Refer to MIR-41, "Removal and Installation". 2. Disconnect light & rain sensor connector.3. Disengage both sides of metal spring clips, and remove the light & rain sensor from the windshield.
INSTALLATION
Note the following items, and the install in the reverse order of removal.
CAUTION:• Surface of windshield should be cleaned. • Never touch gel/adhesive of new part.
• Lock the metal spring clips and install the light & rain sensor securely.
Was this page helpful?