Exterior Lighting System Halogen type
License plate lamp
In this manual: Exterior Lighting System Halogen type
~1min read
Exploded View

1. License plate lamp housing assembly 2. Blub
3. License plate lamp blub socket
: Pawl
Removal and Installation
CAUTION:Disconnect battery negative terminal or remove the fuse.
REMOVAL
1. While pressing the license plate lamp to direction right side, pull it to direction outside and then remove it.2. Disconnect license plate lamp connector.

INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:• Disconnect the battery negative terminal or the fuse. • Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. • Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1. Remove license plate lamp. 2. Rotate the bulb socket counterclockwise and unlock it.3. Remove the bulb from the socket.
Was this page helpful?