Exterior Lighting System Halogen type
High-mounted stop lamp
In this manual: Exterior Lighting System Halogen type
~1min read
Exploded View

1. High-mounted stop lamp 2. Seal packing
: N·m (kg-m, in-lb)
Removal and Installation
CAUTION:Disconnect battery negative terminal or remove the fuse.
REMOVAL
1. Remove blind seal from back door inside.
CAUTION:Be careful not to damage the blind seal, so that it can be reused. 2. Remove high-mounted stop lamp mounting nuts and connector.
3. Pull high-mounted stop lamp toward vehicle upside, and then remove high-mounted stop lamp.
INSTALLATION
Note the following item and then, install in the reverse order of removal.
CAUTION:Seal packing cannot be reused.
Was this page helpful?