Interior

Headlining

In this manual: Interior
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~3min read
Exploded View

LHD models

1. Headlining assembly

1. Headlining assembly 2. Assist grip clip
3. Rear assist grip RH
4. Front assist grip RH 5. Sun visor assembly RH 6. Sun visor cover RH
7. Sun visor cover LH
8. Sun visor assembly LH 9. Rear assist grip LH
10. Headlining clip
11. Sun visor holder RH 12. Map lamp
13. Sun visor holder LH 14. Metal clip

: Pawl: Clip
Removal and Installation: Pawl


Removal and Installation

REMOVAL

CAUTION:
• When removing, always use a remover tool that is made of plastic.

• Never damage the body.

1. Remove front pillar garnish (LH and RH). Refer to INT-18, "FRONT PILLAR GARNISH : Removal and Installation".

2. Disconnect harness connector (A) from headlining and harness clips.

: Clip


3. Remove center pillar upper garnish (LH and RH). Refer to INT-21, "CENTER

3. Remove center pillar upper garnish (LH and RH). Refer to INT-21, "CENTER PILLAR UPPER GARNISH : Removal and Installation".

4. Remove back door weather-strip.

• TYPE1: Refer to DLK-170, "BACK DOOR WEATHER-STRIP : Removal and Installation". • TYPE2: Refer to DLK-333, "BACK DOOR WEATHER-STRIP : Removal and Installation". • TYPE3: Refer to DLK-468, "BACK DOOR WEATHER-STRIP : Removal and Installation".

• TYPE4: Refer to DLK-584, "BACK DOOR WEATHER-STRIP : Removal and Installation".

5. Remove luggage side upper finisher (LH and RH).INT-32, "LUGGAGE SIDE UPPER FINISHER : Removal and Installation".

6. Remove all assist grips.

1. Disengage pawl of assist grip clip (1) using a remover tool (A). Slide assist grip clip forward and remove it.

2. Slide assist grip (2) forward and remove it.: Pawl


2. Slide assist grip (2) forward and remove it.

3. Remove metal clips.

3. Remove metal clips.

7. Remove sun visor assembly (LH and RH).

1. Disengage sun visor cover fixing pawls with a remover tool (A), and then remove sun visor cove

: Pawl


2. Remove sun visor assembly fixing screw, and then remove sun visor

2. Remove sun visor assembly fixing screw, and then remove sun visor assembly.

8. Remove inside mirror and inside mirror cover. Refer to MIR-41, "Removal and Installation". 9. Remove map lamp assembly. Refer to INL-37, "Removal and Installation".

10. Remove front seat assembly (passenger).

• 2WD models: Refer to SE-19, "Removal and Installation".

• 4WD models: Refer to SE-27, "Removal and Installation".

11. Remove sun visor holder (LH and RH).

Rotate 90°. Remove toward vehicle lower.

12. Remove headlining clips.

12. Remove headlining clips.

13. Remove headlining assembly through the back door.

CAUTION:
• Two workers are required for removal in order to prevent damage. • Apply protective tape to the portion where contact may occur during work.

• Never bend headlining when removing.

INSTALLATION

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
• When installing headlining, start by installing both sun visor holders and headlining clips in order to keep the headlining in position. • Never bend headlining when installing.

• Be careful that the surface is not wrinkled when installing.