Horn function
Component Function Check
1.CHECK FUNCTION 1 1. Disconnect vehicle security horn relay. 2. Perform “VEHICLE SECURITY HORN” in “ACTIVE TEST” mode of “THEFT ALM” of “BCM” using CONSULT- III.3. Check the horn operation.

Is the operation normal? YES >> GO TO 2.
NO >> Go to SEC-225, "Diagnosis Procedure".
2.CHECK FUNCTION 2 1. Reconnect vehicle security horn relay. 2. Disconnect horn relay. 3. Perform “VEHICLE SECURITY HORN” in “ACTIVE TEST” mode of “THEFT ALM” of “BCM” using CONSULT- III.4. Check the horn operation.

Is the operation normal? YES >> INSPECTION END
NO >> Go to SEC-225, "Diagnosis Procedure".
Diagnosis Procedure
1.INSPECTION STARTPerform inspection in accordance with procedure that confirms malfunction.
Which procedure confirms malfunction? Component Function Check 1>>GO TO 2.Component Function Check 2>>GO TO 4.
2.CHECK HORN FUNCTIONCheck that horn functions properly using horn switch.
Do horns sound? YES >> GO TO 3.
NO >> Check horn circuit. Refer to HRN-3, "Wiring Diagram".
3.CHECK HORN CONTROL CIRCUIT 1. Disconnect horn relay. 2. Disconnect IPDM E/R connector.3. Check continuity between IPDM E/R harness connector and horn relay harness connector.

4. Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal? YES >> GO TO 6.
NO >> Repair or replace harness.
4.CHECK HORN FUNCTIONCheck that vehicle security horn functions properly using horn switch.
Do horns sound? YES >> GO TO 5.
NO >> Check vehicle security horn circuit. Refer to HRN-3, "Wiring Diagram".
5.CHECK VEHICLE SECURITY HORN CONTROL CIRCUIT 1. Disconnect IPDM E/R connector.2. Check continuity between IPDM E/R harness connector and vehicle security horn relay harness connector.

3. Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal? YES >> GO TO 6.
NO >> Repair or replace harness.
6.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
>> INSPECTION END