PTC heater control unit connection recognition signal circuit
In this manual: Meter, Warning Lamp & Indicator
~1min read
Diagnosis Procedure1.CHECK PTC HEATER CONTROL UNIT CONNECTION RECOGNITION SIGNAL 1. Turn ignition switch ON.
2. Check voltage between combination meter harness connector and ground.
Is the inspection result normal? YES >> INSPECTION END NO >> GO TO 2.
2.CHECK PTC HEATER CONTROL UNIT CONNECTION RECOGNITION SIGNAL CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect combination meter connector and PTC heater control unit connector.
3. Check continuity between combination meter harness connector and PTC heater control unit harness connector.
4. Check continuity between combination meter harness connector and ground.
Is the inspection result normal? YES >> INSPECTION END