Engine Control System HR16DE
Throttle valve closed position learning
In this manual: Engine Control System HR16DE
~1min read
Description
Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected.
Work Procedure
1.START 1. Make sure that accelerator pedal is fully released. 2. Turn ignition switch ON.3. Turn ignition switch OFF and wait at least 10 seconds.
Make sure that throttle valve moves during above 10 seconds by confirming the operating sound.
>> END
Was this page helpful?