Electrical & Power Control
A-Bag Branch Line Circuit
In this manual: Electrical & Power Control
3steps
~18min
2/5difficulty
Done 0 of 3
CHECK CONNECTOR
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the air bag diagnosis sensor unit for damage, bend and loose connection (unit side and connector side).
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace the main harness.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
Check the air bag diagnosis sensor unit. Refer to Work Flow.
Is the inspection result normal?
YES>>Replace the main harness.
NO>>Replace parts whose air bag system has a malfunction.
Was this page helpful?