Body Interior
Additional Service When Replacing Control Unit
In this manual: Body Interior
~1min read
Each function is reset to the following condition when the driver seat control unit is replaced.
| Function | Condition | Procedure |
|---|---|---|
| Memory (Seat, steering column, door mirror) | Erased | Perform storing |
| Entry/exit assist | ON | Perform initialization |
| Set slide amount*1 | ||
| Linking a key fob to meter display | Erased | Perform initialization |
| Perform storing |
*1: Default value is 40 mm.
SYSTEM INITIALIZATION
Perform system initialization. Refer to Work Procedure.
>>GO TO 2.
MEMORY STORAGE
Perform memory storage. Refer to Work Procedure.
>>GO TO 3.
INTELLIGENT KEY INTERLOCK STORAGE
Perform Intelligent Key interlock storage. Refer to Work Procedure.
>>GO TO 4.
SYSTEM SETTING
Perform system setting. Refer to Work Procedure.
>>Inspection End.
Was this page helpful?