Linking Key Fob to the Meter Display
Always perform when the battery terminal is disconnected or the driver seat control unit is replaced. Linking key fob to the meter display will not operate normally if no memory storage is performed.
Intelligent Key Interlock Storage Procedure
Performing the following operation associates the registered driving position with Intelligent Key. When driver door unlock operation is performed by Intelligent Key or driver door request switch, display of the registered driving position and turnout operation can be performed.
STEP 1
Check the following conditions:
Ignition switch: ON
Initialization: done
Driving position: registered
GO TO 2.
STEP 2
Switch ignition from ON to OFF (ADP memory automatically at the ignition OFF timing).
GO TO 3.
STEP 3
Confirm the operation of each part with memory operation and linking a key fob to the meter display operation.
>>Inspection End.