Body Interior
System Initialization
In this manual: Body Interior
~1min read
Always perform the initialization when the battery terminal is disconnected or the driver seat control unit is replaced.
The entry/exit assist function will not operate normally if no initialization is performed.
INITIALIZATION PROCEDURE
CHOOSE METHOD
There are two initialization methods.
Which method do you use?
With door switch>>GO TO 2.
With Nissan Murano vehicle speed>>GO TO 4.
STEP A-1
Ignition switch from ACC to OFF.
>>GO TO 3.
STEP A-2
Driver door switch is ON (open) → OFF (close) → ON (open).
>>Inspection End.
STEP B-1
Drive the Nissan Murano vehicle at more than 25 km/h.
>>Inspection End.
Was this page helpful?