Restraints

Air Bag Diagnosis Sensor Unit

~3min read
Exploded View
1. Air bag diagnosis sensor unit Front
Removal and Installation

REMOVAL

Always check air bag diagnosis sensor unit ECU discriminated number (identification number) or part number using CONSULT.

Disconnect negative and positive battery terminals then wait at least three minutes. Refer to Removal and Installation.

Remove the center floor duct. Refer to Removal and Installation.

Disconnect harness connectors for the following SRS components: Removal and Installation (side curtain air bag modules), Removal and Installation (front seat belt pre-tensioner) and Removal and Installation (front side air bag module).

Remove air bag diagnosis sensor unit bolts.

Disconnect harness connectors from air bag diagnosis sensor unit and remove.

INSTALLATION

Installation is in the reverse order of removal.