Restraints

Driver Air Bag Module

~2min read
Exploded View
1. Steering wheel 2. Cover 3. Steering switches
4. Driver air bag module A. Driver air bag module bolt Pawl
Removal and Installation

REMOVAL

Disconnect negative and positive battery terminals then wait at least three minutes. Refer to Removal and Installation.

Remove the covers (LH/RH).

Remove the driver air bag module bolts (LH/RH).

Lift the driver air bag module from the steering wheel.

Disconnect the harness connectors from the driver air bag module.

Remove the driver air bag module.

INSTALLATION

Installation is in the reverse order of removal.

  • Route the driver air bag module harness through the hook (A) so that the orange connector wire (1) and the yellow connector wire (2) are routed as shown then attach the connectors.