Restraints

Side Curtain Air Bag Module

~3min read
0102030405010.88N·mlb·ft
Tightening torque found on this page
Exploded View
1. Side curtain air bag module A. Refer to Removal and Installation. Front
Removal and Installation

REMOVAL

Disconnect negative and positive battery terminals then wait at least three minutes. Refer to Removal and Installation.

Remove headlining. Refer to Removal and Installation.

Disconnect harness connector from side curtain air bag module.

Remove side curtain air bag module bolts.

Disconnect side curtain air bag module bracket supporting hooks and remove side curtain air bag module.

INSTALLATION

Install the side curtain air bag module in the following order:Install support hooks in order shown. Install bolts and tighten to specification in reverse order shown.

Side curtain air bag module bolts :10,8 N·m

Connect the harness connector to the side curtain air bag module.

: Front

Installation of the remaining components is in the reverse order of removal.