Restraints

B00a0 Occupant Classification System Control Unit

89steps
~534min
5/5difficulty
Done 0 of 89
DTC Description

DESCRIPTION

DTC B00A0 OCCUPANT CLASSIFICATION SYSTEM (OCS)

The OCS control unit is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor the OCS for failures and interruptions in communication between the OCS control unit and the air bag diagnosis sensor unit.

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detecting condition
B00A0-00

OCCUPANT SENS

[ABNORMAL VOLTAGE]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system sensor signal
Threshold Power supply malfunction of occupant classification system sensor.
Diagnosis delay time —
B00A0-02

OCCUPANT SENS

[UNIT MALFUNC]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system sensor signal
Threshold Malfunction of occupant classification system sensor.
Diagnosis delay time —
B00A0-09

OCCUPANT SENS

[UNIT MALFUNC]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system sensor signal
Threshold Malfunction of occupant classification system sensor.
Diagnosis delay time —
B00A0-04

OCCUPANT SENS C/U

[UNIT MALFUNC]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold
  • Communication malfunction of occupant classification system control unit

  • Communication blank of occupant classification system control unit

Diagnosis delay time —
B00A0-83

OCCUPANT SENS C/U

[COMM ERR]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold
  • Communication malfunction of occupant classification system control unit

  • Communication blank of occupant classification system control unit

Diagnosis delay time —
B00A0-86

OCCUPANT SENS C/U

[COMM ERR]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold
  • Communication malfunction of occupant classification system control unit

  • Communication blank of occupant classification system control unit

Diagnosis delay time —
B00A0-87

OCCUPANT SENS C/U

[COMM ERR]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold
  • Communication malfunction of occupant classification system control unit

  • Communication blank of occupant classification system control unit

Diagnosis delay time —
B00A0-88

OCCUPANT SENS C/U

[COMM ERR]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold
  • Communication malfunction of occupant classification system control unit

  • Communication blank of occupant classification system control unit

Diagnosis delay time —
B00A0-8F

OCCUPANT SENS C/U

[UNDEFINED]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold Undefined status of occupant classification system control unit.
Diagnosis delay time —
B00A0-93

OCCUPANT SENS C/U

[RESET]

[Occupant Classification System (Subfault)]
Diagnosis condition When ignition switch is ON.
Signal (terminal) Occupant classification system control unit signal
Threshold Reset malfunction of occupant classification system control unit.
Diagnosis delay time —

POSSIBLE CAUSE

[B00A0–00]

  • Connection malfunction or short circuit to power supply of harness or connector

  • Internal malfunction of occupant classification system sensor

  • Internal malfunction of air bag diagnosis sensor unit

[B00A0–02, B00A0–09]

  • Connection malfunction of harness or connector

  • Internal malfunction of occupant classification system sensor

  • Internal malfunction of air bag diagnosis sensor unit

[B00A0–04, B00A0–83, B00A0–86, B00A0–87, B00A0–88, B00A0–8F]

  • Connection malfunction or open circuit of harness and connector

  • Internal malfunction of occupant classification system control unit

  • Internal malfunction of air bag diagnosis sensor unit

[B00A0–93]

  • Connection malfunction of harness and connector

  • Internal malfunction of occupant classification system control unit

  • Internal malfunction of air bag diagnosis sensor unit

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

CHECK SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON.

  2. Select "Self Diagnostic Result" mode of "AIR BAG".

  3. Check the DTC.

Is the DTC detected?

YES>>

(Current DTC) Refer to:

  • B00A0-00, -02 or -09: DTC Diagnosis Procedure (B00A0-00, -02 or -09).

  • B00A0-04: DTC Diagnosis Procedure (B00A0-04).

  • B00A0-83, -86, -87, -88 or -8F: DTC Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F).

  • B00A0-93: DTC Diagnosis Procedure (B00A0-93).

YES>>

(Past DTC) GO TO 2.

NO>>

Inspection End.

ERASE SELF DIAGNOSTIC RESULT

CONSULT

Erase the DTC.

Can the DTC be erased?

YES>>

Inspection End.

NO>>

Refer to:

  • B00A0-00, -02 or -09: DTC Diagnosis Procedure (B00A0-00, -02 or -09).

  • B00A0-04: DTC Diagnosis Procedure (B00A0-04).

  • B00A0-83, -86, -87, -88 or -8F: DTC Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F).

  • B00A0-93: DTC Diagnosis Procedure (B00A0-93).

DTC CONFIRMATION PROCEDURE

CHECK SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON.

  2. Check the air bag warning lamp status. Refer to SRS Operation Check.

Is the DTC detected?

YES>>

Refer to:

  • B00A0-00, -02 or -09: DTC Diagnosis Procedure (B00A0-00, -02 or -09).

  • B00A0-04: DTC Diagnosis Procedure (B00A0-04).

  • B00A0-83, -86, -87, -88 or -8F: DTC Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F).

  • B00A0-93: DTC Diagnosis Procedure (B00A0-93).

NO>>

Inspection End.

Diagnosis Procedure (B00A0-00, -02 or -09)

HARNESS CONNECTOR

Visually inspect all applicable harness connectors for the following:

  • Visible damage to connector or terminal

  • Loose terminal

  • Poor connection

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Perform the following repairs. Then, GO TO 2.

  • Visible damage: Replace the harness.

  • Loose terminal: Secure the terminal.

  • Poor connection: Secure the connection.

CONFIRM DTC

CONSULT

  1. Reconnect all harness connectors.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 3.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE OCS CONTROL UNIT AND SENSORS

CONSULT

  1. Replace the OCS control unit and sensors. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 4.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

AIR BAG DIAGNOSIS SENSOR UNIT

CONSULT

  1. Replace the air bag diagnosis sensor unit. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 5.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

RELATED HARNESS

CONSULT

  1. Replace the related harnesses (OCS sensors to OCS control unit, OCS control unit to seat, seat to main harness, main harness to air bag diagnosis sensor unit).

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 6.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE PASSENGER SEAT CUSHION FRAME

CONSULT

  1. Replace the passenger seat cushion frame. Refer to Seat Cushion.

  2. Clear DTC and perform zero point reset. Refer to Description.

>>

Inspection End.

Diagnosis Procedure (B00A0-04)

HARNESS CONNECTOR

Visually inspect all applicable harness connectors for the following:

  • Visible damage to connector or terminal

  • Loose terminal

  • Poor connection

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Perform the following repairs. Then, GO TO 2.

  • Visible damage: Replace the harness.

  • Loose terminal: Secure the terminal.

  • Poor connection: Secure the connection.

CONFIRM DTC

CONSULT

  1. Reconnect all harness connectors.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 3.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE OCS CONTROL UNIT

CONSULT

  1. Replace the OCS control unit. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 4.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

AIR BAG DIAGNOSIS SENSOR UNIT

CONSULT

  1. Replace the air bag diagnosis sensor unit. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 5.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

RELATED HARNESS

CONSULT

  1. Replace the related harnesses (OCS sensors to OCS control unit, OCS control unit to seat, seat to main harness, main harness to air bag diagnosis sensor unit)

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 6.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE OCS SENSORS

CONSULT

  1. Replace the OCS sensors. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 7.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE PASSENGER SEAT CUSHION FRAME

CONSULT

  1. Replace the passenger seat cushion frame. Refer to Seat Cushion.

  2. Clear DTC and perform zero point reset. Refer to Description.

>>

Inspection End.

Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F)

HARNESS CONNECTOR

Visually inspect all applicable harness connectors for the following:

  • Visible damage to connector or terminal

  • Loose terminal

  • Poor connection

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Perform the following repairs. Then, GO TO 2.

  • Visible damage: Replace the harness.

  • Loose terminal: Secure the terminal.

  • Poor connection: Secure the connection.

CONFIRM DTC

CONSULT

  1. Reconnect all harness connectors.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 3.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE OCS CONTROL UNIT AND SENSORS

CONSULT

  1. Replace the OCS control unit and sensors. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 4.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

AIR BAG DIAGNOSIS SENSOR UNIT

CONSULT

  1. Replace the air bag diagnosis sensor unit. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 5.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

RELATED HARNESS

CONSULT

  1. Replace the related harnesses (OCS sensors to OCS control unit, OCS control unit to seat, seat to main harness, main harness to air bag diagnosis sensor unit).

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 6.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE PASSENGER SEAT CUSHION FRAME

CONSULT

  1. Replace the passenger seat cushion frame. Refer to Seat Cushion.

  2. Clear DTC and perform zero point reset. Refer to Description.

>>

Inspection End.

Diagnosis Procedure (B00A0-93)

PERFORM ZERO POINT RESET

CONSULT

  1. Perform zero point reset. Refer to Description.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 2.

NO>>

Clear DTC. Inspection End.

HARNESS CONNECTOR

Visually inspect all applicable harness connectors for the following:

  • Visible damage to connector or terminal

  • Loose terminal

  • Poor connection

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Perform the following repairs. Then, GO TO 3.

  • Visible damage: Replace the harness.

  • Loose terminal: Secure the terminal.

  • Poor connection: Secure the connection.

CONFIRM DTC

CONSULT

  1. Reconnect all harness connectors.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 4.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE OCS CONTROL UNIT

CONSULT

  1. Replace the OCS control unit. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 5.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

AIR BAG DIAGNOSIS SENSOR UNIT

CONSULT

  1. Replace the air bag diagnosis sensor unit. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 6.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

RELATED HARNESS

CONSULT

  1. Replace the related harnesses (OCS sensors to OCS control unit, OCS control unit to seat, seat to main harness, main harness to air bag diagnosis sensor unit)

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 7.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE OCS SENSORS

CONSULT

  1. Replace the OCS sensors. Refer to Removal and Installation.

  2. Ignition switch ON.

  3. Select "Self Diagnostic Result" mode of "AIR BAG".

  4. Check for DTC.

Is DTC still current?

YES>>

GO TO 8.

NO>>

Clear DTC and perform zero point reset. Refer to Description.

REPLACE PASSENGER SEAT CUSHION FRAME

CONSULT

  1. Replace the passenger seat cushion frame. Refer to Seat Cushion.

  2. Clear DTC and perform zero point reset. Refer to Description.

>>

Inspection End.