Restraints
U1010 Control Unit(can)
In this manual: Restraints
3steps
~18min
2/5difficulty
Done 0 of 3
DESCRIPTION
Air bag diagnosis sensor unit performs self-tests at ignition switch ON. If CAN communication failure within control unit is detected, DTC is set.
DTC DETECTION LOGIC
| DTC No. | CONSULT screen items (Trouble diagnosis content) | DTC detecting condition | |
|---|---|---|---|
| U1010-49 | CONTROL UNIT(CAN) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | — | ||
| Threshold | — | ||
| Diagnosis delay time | — | ||
POSSIBLE CAUSE
Air bag diagnosis sensor unit
FAIL-SAFE
—
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “AIR BAG”.
Check if DTC is displayed in the “Self Diagnostic Result”.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>Inspection End.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
Replace air bag diagnosis sensor unit. Refer to Removal and Installation.
>>Inspection End.
Was this page helpful?