Restraints
B1427 Config Setting
In this manual: Restraints
2steps
~12min
1/5difficulty
Done 0 of 2
DTC DETECTION LOGIC
| DTC No. | CONSULT screen items (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| B1427-55 | ECU SETTING (Electronic control unit setting) |
Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | — | ||
| Threshold | When no data is stored in the air bag diagnosis sensor unit. | ||
| Diagnosis delay time | 1 second or more. | ||
POSSIBLE CAUSE
Mistake of configuration of air bag diagnosis sensor unit
Incomplete configuration of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
CHECK SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “AIR BAG”.
Is malfunctioning part detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
PERFORM CONFIGURATION
Perform configuration for air bag diagnosis sensor unit.
>>Refer to Work Procedure.
Was this page helpful?