Restraints

B1400 Through B1420 Air Bag Diagnosis Sensor Unit

7steps
~42min
3/5difficulty
Done 0 of 7
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detecting condition
B1400-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1401-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1402-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1403-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1404-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1405-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1406-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1407-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1408-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1409-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1410-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1411-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1412-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1413-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1414-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1415-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1416-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1417-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1418-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1419-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —
B1420-00

CONTROL UNIT

[UNIT MALFUNC]
Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold —
Diagnosis delay time —

POSSIBLE CAUSE

Malfunction in air bag diagnosis sensor unit

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

CHECK SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON.

  2. Select "Self Diagnostic Result" mode of "AIR BAG".

  3. Check for DTC.

Is the DTC detected?

YES>>

(Current DTC) Refer to DTC Diagnosis Procedure.

YES>>

(Past DTC) GO TO 2.

NO>>

Inspection End.

ERASE SELF DIAGNOSTIC RESULT

CONSULT

Erase the DTC.

Can the DTC be erased?

YES>>

Inspection End.

NO>>

Refer to DTC Diagnosis Procedure.

DTC CONFIRMATION PROCEDURE

CHECK SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON.

  2. Check the air bag warning lamp status. Refer to SRS Operation Check.

Is the DTC detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO>>

Inspection End.

Diagnosis Procedure

CHECK HARNESS CONNECTOR

Check the harness connector for disconnection, looseness or damage.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Damage: Replace malfunctioning harness and connector.

NO>>

Disconnection or looseness: Securely lock the connector.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Replace malfunctioning harness and connector.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

  1. Replace air bag diagnosis sensor unit. Refer to Removal and Installation.

  2. Perform DTC confirmation procedure. Refer to DTC Description.

Is DTC detected?

YES>>

GO TO 1.

NO>>

Inspection End.