Driver Information & Multimedia

Diagnosis and Repair Workflow

7steps
~42min
2/5difficulty
Done 0 of 7
Work Flow

OVERALL SEQUENCE

  • Reference 1: Refer to CONSULT Function (Around View Monitor Control Unit) or CONSULT Function (Sonar Control Unit).

  • Reference 2: Refer to DTC Index (Around View Monitor Control Unit) or DTC Index (Sonar Control Unit).

  • Reference 3: Refer to Symptom Table (Around View Monitor Control Unit) or Symptom Table (Sonar Control Unit).

DETAILED FLOW

INTERVIEW AND SYMPTOM CONFIRMATION

Check the malfunction symptoms by performing the following items:

  • Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).

  • Check the symptom.

Is the occurred symptom a malfunction?

YES>>

GO TO 2.

NO>>

Inspection End.

DIAGNOSIS WITH CONSULT

CONSULT

  1. Select “Self Diagnostic Result” mode of “AVM” and “SONAR”. Refer to CONSULT Function (Around View Monitor Control Unit) or CONSULT Function (Sonar Control Unit).

  2. When DTC is detected, follow the instructions below:

    • Record DTC and Freeze Frame Data (FFD).

Is DTC displayed?

YES>>

GO TO 3.

NO>>

GO TO 4.

TROUBLE DIAGNOSIS FOR DTC

CONSULT

  1. Check the DTC indicated in the “Self Diagnostic Result”.

  2. Perform the relevant diagnosis referring to the DTC Index. Refer to DTC Index (Around View Monitor Control Unit) or DTC Index (Sonar Control Unit).

>>

GO TO 5.

TROUBLE DIAGNOSIS FOR SYMPTOMS

Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to Symptom Table (Around View Monitor Control Unit) or Symptom Table (Sonar Control Unit).

>>

GO TO 5.

ERROR PART REPAIR

CONSULT

  1. Repair or replace the identified malfunctioning parts.

  2. Select “Self Diagnostic Result” mode of “AVM” and “SONAR”.

  3. Check that the symptom does not occur.

Does the symptom occur?

YES>>

GO TO 1.

NO>>

Inspection End.