Electrical & Power Control
Flasher
In this manual: Electrical & Power Control
~1min read
ECU IDENTIFICATION
The BCM part number is displayed.
SELF DIAGNOSTIC RESULT
Refer to DTC Index.
DATA MONITOR
Monitor Item [Unit] | Description |
|---|---|
| REQ SW -DR [On/Off] | Indicates condition of door request switch LH. |
| REQ SW -AS [On/Off] | Indicates condition of door request switch RH. |
| PUSH SW [On/Off] | Indicates condition of push-button ignition switch. |
| TURN SIGNAL R [On/Off] | Indicates condition of turn signal function of combination switch. |
| TURN SIGNAL L [On/Off] | |
| HAZARD SW [On/Off] | Indicates condition of hazard switch. |
| RKE-LOCK [On/Off] | Indicates condition of lock signal from Intelligent Key. |
| RKE-UNLOCK [On/Off] | Indicates condition of unlock signal from Intelligent Key. |
| RKE-PANIC [On/Off] | Indicates condition of panic alarm signal from Intelligent Key. |
ACTIVE TEST
| Test Item | Description |
|---|---|
| FLASHER | This test is able to check turn signal lamp operation [Off/LH/RH]. |
WORK SUPPORT
| Support item | Setting | Description |
|---|---|---|
| 3-TIME FLASHER SETTING | ON* | 3-Time flasher setting ON. |
| OFF | 3-Time flasher setting OFF. |
*: Initial setting
Was this page helpful?