Electrical & Power Control
Wiper
In this manual: Electrical & Power Control
~1min read
ECU IDENTIFICATION
The BCM part number is displayed.
SELF DIAGNOSTIC RESULT
Refer to DTC Index.
DATA MONITOR
| Monitor Item [Unit] | Description |
|---|---|
| PUSH SW [On/Off] | Indicates condition of push-button ignition switch. |
| VEH SPEED 1 [km/h] | Indicates Nissan Murano vehicle speed signal received from ABS on CAN communication line. |
| FR WIPER HI [On/Off] | Indicates condition of wiper operation of combination switch. |
| FR WIPER LOW [On/Off] | |
| FR WASHER SW [On/Off] | |
| FR WIPER INT [On/Off] | |
| FR WIPER STOP [On/Off] | Indicates front wiper auto stop signal received from IPDM E/R on CAN communication line. |
| INT VOLUME [1 − 7] | Indicates condition of intermittent wiper operation of combination switch. |
| RR WIPER ON [On/Off] | Indicates condition of rear wiper operation of combination switch. |
| RR WIPER INT [On/Off] | |
| RR WASHER SW [On/Off] | |
| RR WIPER STOP [On/Off] | Indicates rear wiper motor auto stop input from rear wiper motor. |
ACTIVE TEST
| Test Item | Description |
|---|---|
| FR WIPER | This test is able to check front wiper operation [Hi/Lo/INT/Off]. |
| RR WIPER | This test is able to check rear wiper operation [On/Off]. |
WORK SUPPORT
| Support Item | Setting | Description |
|---|---|---|
| WIPER SPEED SETTING | On | Front wiper intermittent time linked with Nissan Murano vehicle speed and wiper dial position. |
| Off* | Front wiper intermittent time linked with wiper dial position. |
*: Initial setting
Was this page helpful?