Electrical & Power Control
Common Item
In this manual: Electrical & Power Control
~2min read
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM:
| Direct Diagnostic Mode | Description |
|---|---|
| ECU Identification | The BCM part number is displayed. |
| Self Diagnostic Result | The BCM self diagnostic results are displayed. |
| Data Monitor | The BCM input/output data is displayed in real time. |
| Active Test | The BCM activates outputs to test components. |
| Work support | The settings for BCM functions can be changed. |
| Configuration |
|
| CAN Diag Support Mntr | The result of transmit/receive diagnosis of CAN communication is displayed. |
SYSTEM APPLICATION
BCM can perform the following functions:
| System | Sub System | Direct Diagnostic Mode | ||||||
|---|---|---|---|---|---|---|---|---|
| ECU Identification | Self Diagnostic Result | Data Monitor | Active Test | Work support | Configuration | CAN Diag Support Mntr | ||
| Door lock | DOOR LOCK | × | × | × | × | × | ||
| Rear window defogger | REAR DEFOGGER | × | × | × | × | × | ||
| Warning chime | BUZZER | × | × | × | × | |||
| Interior room lamp timer | INT LAMP | × | × | × | × | × | ||
| Exterior lamp | HEAD LAMP | × | × | × | × | × | ||
| Wiper and washer | WIPER | × | × | × | × | × | ||
| Turn signal and hazard warning lamps | FLASHER | × | × | × | × | × | ||
| Air conditioner | AIR CONDITIONER | × | × | × | ||||
| Intelligent Key system | INTELLIGENT KEY | × | × | × | × | × | ||
| Combination switch | COMB SW | × | × | × | ||||
| BCM | BCM | × | × | × | × | × | ||
| Immobilizer | IMMU | × | × | × | × | |||
| Interior room lamp battery saver | BATTERY SAVER | × | × | × | × | |||
| Back door open | TRUNK | × | × | × | ||||
| Nissan Murano Vehicle security system | THEFT ALM | × | × | × | × | × | ||
| RAP system | RETAINED PWR | × | × | × | ||||
| Signal buffer system | SIGNAL BUFFER | × | × | × | × | |||
| TPMS | AIR PRESSURE MONITOR | × | × | × | × | |||
Was this page helpful?