Driver Controls

Front Combination Lamp

~1min read
Exploded View
1. Front combination lamp
Removal and Installation

REMOVAL

Remove front bumper fascia. Refer to Removal and Installation.

Remove front combination lamp bolts.

Pull front combination lamp forward.

Disconnect harness connectors from front combination lamp and remove.

INSTALLATION

Installation is in the reverse order of removal.

Bulb Replacement

HEADLAMP BULB

The headlamp bulb is LED and not serviced separately. Refer to Removal and Installation.

SIDE MARKER LAMP BULB

The side marker lamp bulb is LED and not serviced separately. Refer to Removal and Installation.

TURN SIGNAL LAMP BULB

The turn signal lamp bulb is LED and not serviced separately. Refer to Removal and Installation.