Driver Controls
License Plate Lamp
In this manual: Driver Controls
~1min read

| 1. | License plate lamp | 2. | Back door outer finisher | Clip | |
| Pawl |
REMOVAL
Remove back door outer finisher. Refer to Removal and Installation.
Disconnect harness connector from license plate lamp.
Release pawls and push license plate lamp forward.
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
Remove back door lower finisher. Refer to Removal and Installation.
Rotate license plate lamp bulb socket counterclockwise and remove.
Remove license plate lamp bulb from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?