Driver Controls
Rear Combination Lamp (body Side)
In this manual: Driver Controls
~1min read

| 1. | Rear combination lamp (body side) | 2. | Rear combination lamp (body side) bolt cover | A. | Grommet |
| Clip |
REMOVAL
Remove rear combination lamp (body side) side cover.

| : Metal clip |
Remove rear combination lamp (body side) bolts.
Pull rear combination lamp sideward to release clip and locators.
Disconnect harness connector from rear combination lamp (body side) and remove.
INSTALLATION
Installation is in the reverse order of removal.
STOP LAMP BULB
The stop lamp bulb is LED and not serviced separately. Refer to Removal and Installation.
SIDE MARKER LAMP BULB
The side marker lamp bulb is LED and not serviced separately. Refer to Removal and Installation.
TURN SIGNAL LAMP BULB
The turn signal lamp bulb is LED and not serviced separately. Refer to Removal and Installation.
Was this page helpful?