Driver Controls
Front Washer Nozzle
In this manual: Driver Controls
~1min read
REMOVAL
Release the pawl and remove the front washer nozzle from the hood.

: Pawl
Disconnect the front washer tube from the front washer nozzle.
INSTALLATION
Installation is in the reverse order of removal.

| 1. | Windshield glass | 2. | Black printed area line | 3. | Wiping area |
| 4. | Front washer nozzle (RH/LH) | 5. | Washer fluid spray pattern | A. | Center line |
| B. | 449.1 mm (17.68 in) | C. | 456.7 mm (17.98 in) | D. | 53.6 mm (2.11 in) |
| E. | 74.4 mm (2.93 in) | F. | 77.1 mm (3.04 in) | G. | 303.1 mm (11.93 in) |
| H. | 560.7 mm (22.07 in) | I. | 96.3 mm (3.79 in) |
Insert a suitable tool (A) into the front washer nozzle hole (B) and move up/down and left/right to adjust the spray position of each nozzle (1).

Was this page helpful?