Engine
Service After Replacing or Removing Engine Parts
In this manual: Engine
~1min read
SPECIAL REPAIR REQUIREMENT
×: Applicable
| Part name | Service performed | Required service | Reference | |
|---|---|---|---|---|
| Replacement | Removal*1 | |||
| ECM | × | Additional service when replacing ECM | Description | |
| × | Accelerator pedal released position learning | Description | ||
| Throttle valve closed position learning | Description | |||
| Idle air volume learning | Description | |||
| VIN registration | Description | |||
| Accelerator Pedal | × | × | Accelerator pedal released position learning | Work Procedure |
| Electric throttle | × | × | Throttle valve closed position learning | Work Procedure |
| × | Idle air volume learning | Work Procedure | ||
| Engine assembly | × | Throttle valve closed position learning*2 | Work Procedure | |
| Idle air volume learning*2 | Work Procedure | |||
| × | Accelerator pedal released position learning | Work Procedure | ||
| Throttle valve closed position learning*2 | Work Procedure | |||
*1: Harness connector disconnection included.
*2: Replacement of engine with a electric throttle.
Was this page helpful?