Engine

Throttle Valve Closed Position Learning

7steps
~42min
2/5difficulty
Done 0 of 7
Description

Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time the harness connector of electric throttle control actuator or ECM is disconnected or electric throttle control actuator is cleaned.

For details, refer to Work Procedure.

Work Procedure

START

WITH CONSULT

  1. Turn ignition switch ON.

  2. Select “CLSD THL POS LEARN” in “WORK SUPPORT” mode.

  3. Follow the instructions on the CONSULT display.

  4. Turn ignition switch OFF and wait at least 10 seconds.

    Check that throttle valve moves during the above 10 seconds by confirming the operating sound.

WITHOUT CONSULT

  1. Start the engine.

  2. Warm up the engine until engine coolant temperature reaches 65 °C.

  3. Turn ignition switch OFF and wait at least 10 seconds.

>>

END