Driver Information & Multimedia

Steering Switches

9steps
~54min
2/5difficulty
Done 0 of 9
Diagnosis Procedure

CHECK STEERING WHEEL AUDIO CONTROL SWITCH RESISTANCE

  1. Ignition switch OFF.

  2. Disconnect combination switch connector.

  3. Check resistance between the terminals of combination switch connector.

Combination switchCondition

Resistance Ω

(Approx.)
ConnectorTerminalTerminal
M143 31 33 Depress SOURCE switch. 1
Depress switch. 121
Depress switch. 321
Depress switch. 723
Depress OK switch. 2023
32 Depress switch. 1
Depress switch. 121
Depress switch. 321
Depress switch. 723
Depress switch. 2023

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace steering switches. Refer to Removal and Installation.

CHECK HARNESS BETWEEN COMBINATION METER AND COMBINATION SWITCH

  1. Disconnect combination meter connector and combination switch connector.

  2. Check continuity between combination meter connector and combination switch connector.

    Combination meterCombination switchContinuity
    ConnectorTerminalConnectorTerminal
    M24 22 M41 4 Yes
    23 3
    21 2
  3. Check continuity between combination meter connector and ground.

    Combination meterGroundContinuity
    ConnectorTerminal
    M24 22 — No
    23
    21

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness or connectors.

CHECK COMBINATION SWITCH

Check continuity between combination switch connectors.

Combination switchContinuity
ConnectorTerminalConnectorTerminal
M143 31 M41 4 Yes
32 3
33 2

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Replace spiral cable. Refer to Removal and Installation.

CHECK HARNESS BETWEEN COMBINATION METER AND AV CONTROL UNIT

  1. Disconnect combination meter connector and AV control unit connector.

  2. Check continuity between combination meter connector and AV control unit connector.

    Combination meterAV control unitContinuity
    ConnectorTerminalConnectorTerminal
    M23 49 M162 22 Yes
    23
    50 42
    43
  3. Check continuity between combination meter connector and ground.

    Combination meterGroundContinuity
    ConnectorTerminal
    M23 49 — No
    50

Is the inspection result normal?

YES>>

Replace audio unit. Refer to Removal and Installation.

NO>>

Repair or replace harness or connectors.