Programmable heating

The programmable heating operates independently of the engine.

With the engine off, it preheats the coolant circuit so that the engine reaches its optimum operating temperature as soon as it starts.

The programmable heating system is switched on using the long-range remote control.

It can start immediately or be delayed using the programming function.

If the programmable heating system malfunctions, contact a PEUGEOT dealer.

Programming remote control

The heating programming remote control consists of the following keys and displays:

1. 1
   Keys for scrolling through the functions.
2. 2
   Function indicators: clock symbol, temperature, operating time, programmed time, heater operation, heating management.
3. 3
   Digital displays: time, temperature, operating time, programmed time or heating level.
4. 4
   Off key.
5. 5
   On key.

Remote control screen displays

Function display

Press keys 1 repeatedly to display the functions.

The first press of the left or right key displays the time.

Then, the left key gives access to the programmed time, then to the heating level (C1 to C5).

The right key gives access to the cabin temperature, then to the heater operating time when starting immediately.

Cabin temperature information is only available with the engine off.

Setting the time

After displaying the time using keys 1 , press keys 4 and 5 simultaneously within 10 seconds.

This symbol flashes.

Set the time using keys 1 .

Press keys 4 and 5 simultaneously to save it.

This symbol is displayed (steady).

Immediate start

Press key 5 (ON) until the message "OK" appears.

When the signal has been received, the message "OK" appears along with the operating time.

The heater starts and this
symbol appears.

To cancel the function, press key 4 (OFF) until the message "OK" appears.

This symbol goes out.

During these operations, if the message "FAIL" appears, the signal has not been received. Repeat the procedure after moving to a different location.

Setting the operating time

Press keys 1 to display the operating time.

This symbol appears.

After displaying the operating time, press keys 4 and 5 simultaneously within 10 seconds.

This symbol flashes.

Set the duration using keys 1 (adjustable in 10-minute steps, maximum 30 min).

Press keys 4 and 5 simultaneously to save the operating time.

This symbol is displayed (steady).

The factory setting is 30 minutes.

Heating programming

You must program your departure time so that the system automatically calculates the optimum time to start the heater.

Setting the departure time

Press keys 1 to display the programmed time.

This symbol appears.

After displaying the programmed time, press keys 4 and 5 simultaneously within 10 seconds.

This symbol flashes.

Set the time using keys 1 , then press keys 4 and 5 simultaneously to save it.

This symbol is displayed (steady).

Activation - deactivation

After displaying the programmed time using keys 1 , press key 5 (ON) until the message "OK" appears.

When the signal has been received,
the message "OK" appears along with the "HTM" symbol.

This symbol appears when
the heater starts.

HTM: Heat Thermo Management (heating management).

To cancel the programming, press key 4 (OFF) until the message "OK" appears.

The "HTM" symbol goes out.

During these operations, if the message "FAIL" appears, the signal has not been received. Repeat the procedure after moving to a different location.

Stopping the heating

Press key 5 (ON).

The "HTM" symbol stays on.

Changing the heating level

The system offers 5 heating levels (C1 the lowest level to C5 the highest level).

After displaying the heating level using keys 1 , press keys 4 and 5 simultaneously.

The letter "C" flashes.

Set the heating level by pressing keys 1 .

Press keys 4 and 5 simultaneously to save the selected level. The letter "C" is displayed (steady).

The factory presets are replaced by the new settings. The programmed times are stored until the next change.

When the departure time is activated, the heating level cannot be changed. The departure time must first be deactivated.

Replacing the battery

The remote control is powered by a supplied 6V-28L battery.

A message on the display indicates that this battery needs to be replaced.

Unclip the case, then replace the battery.

The remote control must then be reset, see below.

Do not dispose of used batteries;
take them to an approved collection point.

Resetting the remote control

If the battery is disconnected or the battery in the remote control is replaced, the remote control must be reset.

After switching on, within 5 seconds, press key 4 (OFF) for 1 second.

If the operation was successful, the message "OK" is displayed on the remote control screen.

If there is a fault, the message "FAIL" appears. Repeat the operation.

As an accessory, an adaptation of your programmable heater allows it to be used to pre-heat the passenger compartment of your vehicle.

Always switch off the
programmable heater while refuelling to avoid any risk of fire or explosion.

To avoid the risk of poisoning and asphyxiation, the programmable heater must not be used, even for short periods, in enclosed spaces such as garages or workshops not equipped with an exhaust gas extraction system.

Do not park the vehicle on a flammable surface (dry grass, dead leaves, paper...), as there is a risk of fire.

The programmable heating system is supplied from the vehicle's fuel tank. Before use, make sure the amount of fuel remaining is sufficient. If the fuel tank is on reserve, we strongly recommend not programming the heater.