Front seats

Manual mode

Fore-aft adjustment

Raise the control bar and slide the seat forwards or backwards.

Driver's seat cushion height and tilt adjustment

Pump up or down until the desired position is reached.

Backrest tilt adjustment

Operate the lever to get comfortable.

Electric mode

Fore-aft adjustment

Push the control forwards or backwards to slide the seat.

Driver's seat cushion height and tilt adjustment

Height: move the rear part of the control up or down.

Tilt: move the front part of the control up or down.

Backrest tilt adjustment

Move the control forwards or backwards to get comfortable.

The driver's seat electric functions are deactivated one minute after switching off the ignition.

To reactivate them, open the door or switch on the ignition.

Driver's seat lumbar adjustment

Operate the lever to obtain the correct position.

Heated seat adjustment

Engine running, turn the knob.

The seat temperature is controlled automatically.

0: Off.

1: Low.

2: Medium.

3: High.

Headrest height and tilt adjustment

To raise or lower it, pull it forwards, then slide it.

To tilt it, tilt its lower part forwards or backwards.

To remove it, move it to almost its highest position, lift the tab using a coin, and pull it forwards and upwards.

To refit it, insert the headrest posts into the holes, keeping them aligned with the centre of the backrest.

Never drive with the headrests removed from the vehicle; it is dangerous, and they can become projectiles in case of heavy braking. They must be in place and correctly adjusted.

The adjustment is correct when the top of the headrest is aligned with the top of the occupant's head.

Active front seat headrests

This is a device designed to help prevent whiplash.

In a rear impact, the occupant's body pressing against the seat backrest moves the head restraint forward and upward, preventing the head from being thrown backward.

Front armrest

To adjust the position of the armrest:

• lift tab 1.

The armrest unfolds forward and upward.

To return to the initial position, push the armrest back and press it down to lock it.