Seat covers

Depending on the vehicle, it is possible to remove the seat covers (for maintenance, personalisation...).

Principle of removing a seat cover

Whether for the backrest or the seat cushion, always follow the removal movement A: do not tear off the hook-and-loop fasteners.

Precautions

When the covers are removed:

• do not use the seats;
• take care of the hook-and-loop fasteners.

Washing instructions

Observe the washing instructions shown on the covers (labels) in particular;

• wash the covers separately from other textiles;
• spin at a maximum speed of 800 rpm;
• do not wash the covers more than 5 times.

Once dry, do not fold or stack the covers (risk of marking).

Risk of serious damage.

Depending on the vehicle, some covers have a marking to indicate that the front passenger seat is equipped with ISOFIX anchorages.

When refitting or replacing the cover, make sure it has the same marking as the original.

For safety reasons, carry out these operations with the vehicle stationary.

When refitting the seat covers, make sure the seat belt buckles and ISOFIX anchorages are clear.

Front seat

Removing the backrest cover

• Tilt the backrest rearward;
• open zips 1 and 3 on the backrest;
• detach hook-and-loop fasteners 5 between the backrest and the seat cushion;
• remove the cover following the reverse of the fitting sequence (movement A).

Refitting the backrest cover

• Tilt the backrest rearward;
• position the cover on the backrest;
• engage and close zips 1 and 3;
• fasten hook-and-loop fasteners 2;
• fasten hook-and-loop fasteners 5 between the backrest and the seat cushion.

When refitting the seat covers, make sure the seat belt buckles and ISOFIX anchorages are clear.

Removing the seat cushion cover

• Open zip 4 on the seat cushion;
• remove the cover following the reverse of the fitting sequence (movement A).

Refitting the seat cushion cover

• Position the cover on the seat cushion;
• close zip 4 on the seat cushion;
• fasten hook-and-loop fasteners 6.

For safety reasons, carry out these operations with the vehicle stationary.

Rear bench seat

• Slide the front seats forward;
• raise the rear bench seat head restraints;
• move the seat belts out of the way.

When operating the rear seats, make sure nothing is obstructing the anchorages (body parts, animal, gravel, cloth, toys, etc.).

Removing the seat cushion cover B

• Open zips 7 and 8 on seat cushion B;
• remove the cover following the reverse of the fitting sequence (movement A).

For safety reasons, carry out these operations with the vehicle stationary.

Refitting the seat cushion cover B

• Position the cover on seat cushion B;
• engage zips 7 and 8 and close them;
• fasten hook-and-loop fasteners 9.

Removing the backrest cover C

• fold backrest C forward onto the seat cushion using lever 11;
• detach hook-and-loop fasteners 15 between the backrest and the seat cushion;
• raise backrest C and make sure it is properly locked;
• open zips 12 and 14 on backrest C;
• remove the cover following the reverse of the fitting sequence (movement A).

Refitting the backrest cover C

• Position the cover on backrest C;
• move the centre rear seat belt aside to position the cover;
• close zips 12 and 14 on backrest C;

When refitting the seat covers, make sure the seat belt buckles and ISOFIX anchorages are clear.

• fasten the hook-and-loop fasteners;
• make sure the cover of backrest C is correctly positioned under the centre belt guide 10;
• fasten hook-and-loop fasteners 13;
• slide the lower cover between backrest C and seat cushion B;
• fold backrest C forward onto the seat cushion using lever 11;
• fasten hook-and-loop fasteners 15 between backrest C and seat cushion B;
• raise backrest C and make sure it is properly locked.

When returning the backrest to position, make sure it is properly locked.

If seat covers are used, make sure they do not prevent the backrest from locking.

Make sure the belts are correctly positioned.

Reposition the head restraints.

Removing the backrest cover D

• Fold backrest D forward onto the seat cushion using lever 16;
• detach hook-and-loop fasteners 17 between the backrest and the seat cushion;
• open zip 18 on backrest D;
• raise backrest D and make sure it is properly locked;

• open zip 20 on backrest D;
• remove the cover following the reverse of the fitting sequence (movement A).

When operating the rear seats, make sure nothing is obstructing the anchorages (body parts, animal, gravel, cloth, toys, etc.).

Refitting the backrest cover D

• Position the cover on backrest D;
• close zip 20;
• fasten hook-and-loop fasteners 19;
• slide the lower cover between backrest D and the seat cushion;
• tilt backrest D back onto the seat cushion using lever 16;
• close zip 18 on backrest D;
• fasten hook-and-loop fasteners 17 between the backrest and the seat cushion;
• raise backrest D fully and make sure it is properly locked.

When returning the backrest to position, make sure it is properly locked.

If seat covers are used, make sure they do not prevent the backrest from locking.

Make sure the belts are correctly positioned.

Reposition the head restraints.