Electrical equipment
Headlamp units and turn signal
In this manual: Electrical equipment
~1min read
NOTE: The headlamp unit and the turn signal lamp cannot be separated.
REMOVAL - REFITTING
Disconnect:
the battery,
the lamp connectors of the turn signal headlamp unit and of the vertical aim adjustment control box.
Remove the upper screw (A).
Remove:
the two bumper screws (D) and the three mudguard retaining screws to partially remove the bumper,
the retaining screw (C) and the screw (B) to remove the headlamp unit.

Refitting the headlamp is the reverse of removal.
ADJUSTMENT
Make sure the vehicle is unladen, then adjust the height using screw (G) and the direction using screw (F).

Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?