Side panel gutter, lamp bracket

INTRODUCTION

Replacement of this part is an additional operation to the rear skirt. It is carried out partially.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on the parts this one complements will be covered in their respective sections (see contents).

M.P.R. PART COMPOSITION

Part assembled with:

• side panel extension,

• lamp bracket with welded studs and nuts,

• bumper beam,

• tailgate balancer reinforcement,

• welded nuts,

• upper hinge reinforcement.

IMPORTANT: the M.P.R. part requires cutting before fitting at the assembled side panel extension (see diagram below).

PARTS CONCERNED (thickness in mm):

1. 1

   Side panel gutter, lamp bracket 1.5

2. 2

   Ø 8 mm screw, 13 spanner

3. 3

   Steel rivet

REMOVAL - REFITTING

1. 1

   Remove the two screws

2. 2

   Drill out the rivet