Upper rear corner reinforcement

INTRODUCTION

Replacement of this part is an additional operation to the roof with crossmember and lining.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on the parts this one complements will be covered in their respective sections (see contents).

M.P.R. PART COMPOSITION

Part only.

PARTS CONCERNED (thickness in mm):

1. 1

   Rear upper corner reinforcement 1

2. 2

   Side lining extension 0.8

3. 3

   Rear roof cross member 0.8

4. 4

   Side panel gutter, lamp bracket 1.5

5. 5

   Roof lining extension 0.8

6. 6

   Base body rear roof crossmember 0.8

7. 7

   Basic body roof panel 0.8

8. 8

   Lining reinforcement

   

   

   

   

   

   

   

   

   

Ø 5 mm bead

Ø 5 mm bead

I = two Ø 8 mm hex-head screws.