Renault Kangoo Quiz
Bodywork

Basic body side panel

In this manual: Bodywork
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

INTRODUCTION

The basic body side sheet metal panel of the Kangoo Grand Volume can be partially replaced using the method described below.

This is possible because the joint is masked when the Grand Volume attached panel is in place.

IMPORTANT: this method cannot be carried out on standard Kangoo.

M.P.R. PART COMPOSITION

Assembly with sliding door rail housings and striker bracket.

Panneau latéral caisse de base

PARTS CONCERNED (thickness in mm):

1 Basic body side panel 0.8

Panneau latéral caisse de base
PARTICULARITE

SPECIAL NOTE

Only operations relating to partial cutting are covered in this method. Other operations are described in M.R. 326.

Panneau latéral caisse de base
Panneau latéral caisse de base
Panneau latéral caisse de base
Panneau latéral rapporté

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.