Renault Kangoo Quiz
Engine and peripherals

Crankshaft seal, timing side

In this manual: Engine and peripherals
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

D7F engine

REMPLACEMENT

REPLACEMENT

REMOVAL

Remove the timing belt (see chapter 11 “Timing belt”).

To remove the crankshaft seal, use tool Mot. 1374.

Joint de vilebrequin côté distribution

Screw the tool body into the seal via nut (1), then turn screw (2) to extract the seal.

INSTALLATION

Fit the new seal onto the crankshaft output shaft without damaging it as it passes the drive groove of the timing gear.

Position it using tool Mot. 1355.

Joint de vilebrequin côté distribution

Fit the new timing belt (see the method described in chapter 11 “Timing belt”).

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.