Renault Megane Quiz
Chassis

Stabiliser bar

In this manual: Chassis
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Tightening torques
anti-roll bar mounting bolt to subframe 2.1 daN.m
steering gear mounting bolt to subframe 10.5 daN.m

REMOVAL

  • Position the vehicle on a two-post lift.
  • Remove:
  • the front subframe (Front Load-Bearing Components chapter, Subframe, page 31A-23),
  • the steering gear mounting bolts to the subframe,
  • the steering gear,
  • the anti-roll bar mounting bolts to the subframe,
  • the anti-roll bar.

INSTALLATION

  • Refit in the reverse order of removal.
WARNING

Correctly position the lugs of the anti-roll bar mounting brackets in the subframe holes.

  • Tighten to the following torques:
  • the anti-roll bar mounting bolts to the subframe (2.1 daN.m),
  • the steering gear mounting bolts to the subframe (10.5 daN.m).

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.