Bodywork
Front cradle rear box
In this manual: Bodywork
3steps
~18min
2/5difficulty
Done 0 of 3
Replacing this part is a complementary operation to replacing the half-assembly, or is related to a fault on the welded front cradle mounting nut.
Information on related parts is covered in their respective sections (see contents).
Where spot welds cannot be made with the spot welder, they may be replaced with plug welds.
REPLACEMENT PART CONTENTS
Part assembled with:
Cradle mounting box
Cradle mounting box reinforcement
Welded nut

PARTS CONCERNED (thickness in mm):
- Front cradle rear box 2
- Central floor front side cross member 1.2
- Central floor side section 0.7/1.2



Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?