Renault Megane Quiz
Bodywork

Radiator support crossmember

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a basic operation for a front lower-section collision.

This is a removable structural element made of galvanised sheet steel.

In the method described below, you will only find the positions of the fasteners specific to this element.

Information on related parts is covered in their respective sections (see contents).

REPLACEMENT PART CONTENTS

Part supplied alone.

Traverse support radiateur

Tightening torques
nut A 2.1 daN.m
nut A 10.5 daN.m
screw C 6.2 daN.m

REMOVAL - REFITTING

Traverse support radiateur

Removal and refitting is carried out using fasteners (A), (B) and (C).

Note: Refer to the Mechanical Repair Manual for the removal and refitting procedures of the surrounding mechanical components.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.