Renault Megane Quiz
Bodywork

Battery tray bracket

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a complementary operation to replacing the front side member front section for a front collision.

Information on related parts is covered in their respective sections (see contents).

Note: The operation presents no particular difficulty.

Where spot welds cannot be made with the spot welder, they may be replaced with plug welds.

For information, a drawing of the part in position on the vehicle is shown in the procedure.

REPLACEMENT PART CONTENTS

Part assembled with:
Lower bracket section
Upper bracket section
Air filter retaining tab
Crimped nuts

Support de bac à batterie

PARTS CONCERNED (thickness in mm):

  1. Battery tray bracket 1.5/2

PART IN POSITION

Support de bac à batterie

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.