Electrical equipment
Electric sunroof control
In this manual: Electrical equipment
~1min read
Essential special tools |
|
| Car. 1597 | Trim clip removal lever for the rear cornering grab handle |
To access the sunroof motor, the roof trim must be removed (see Roof trim in MR 365 - Bodywork).
The motor is located in the rear part of the roof.
REMOVAL

- Remove:
- the sunroof switch and its connector,
- the courtesy light,
- the pillar trims (see MR 365 - Bodywork).

- Remove:
- the front and rear grab handles using tool (Car.1597),
- the rear clip,
- the two rear fixings.

- Unclip and disconnect the sunroof motor connector.
- Remove the fixing screws (1).
- Release:
- the connector bracket,
- the sunroof motor.
INSTALLATION
- Refit in the reverse order of removal.
- Be sure to initialise the system after refitting the motor (Chapter Power windows - Sunroof, Sunroof opening motor: Initialisation, page 87D-23).
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?